Q&A on Flexible Plastic Printing Technology 2

Dec 29, 2023 Leave a message

Q&A on Flexible Plastic Printing Technology

1. When using the dry composite method to produce instant noodle lid material, why use a two-component PU adhesive when paper and aluminum foil are not easily bonded?

A1: Paper, being porous, and aluminum foil, with residual grease on its surface, present challenges in bonding. Using a two-component PU adhesive increases the adhesive quantity applied to the paper, addressing absorption issues. Utilizing reverse-roll coating or applying a layer of EVA hot melt adhesive before the PU adhesive enhances bonding. Flame treatment of aluminum foil further improves composite strength.

2. What are the four layers in a four-layer structure high-temperature cooking bag, and what does the term "special layer" refer to?

A2: A four-layer transparent high-temperature cooking bag consists of PET12μm/PA612μm/Aluminum foil 9μm/CPP70μm or PET12/Ny12μm/high-barrier PVDC film. The "special layer" mentioned in some sources refers to high barrier materials like PVDC or EVAL.

3. Why does color fade during the printing process?

A3: Color fading during printing may result from the presence of water, dust, or incompatible solvents in the ink, leading to gelation. Gelatinized ink reduces resin content, adhesion, and pigment dispersion, causing color lightening.

4. How to prevent oxidation of the metal layer in aluminum-plated PET film?

A4: To prevent oxidation of the aluminum layer, laminating an additional layer of PET film using lamination or extrusion coating methods is effective. Extrusion coating is suitable for smaller boxes, providing flexibility, while lamination is used for larger boxes. The choice depends on the specific requirements.

5. How to address the issue of powder adhesion during vertical F/F/S packaging of powdered food materials in aluminum-plated PET film bags?

A5: Powder adhesion can be caused by static electricity or excessive moisture absorption by the food material. To address static electricity, increase environmental humidity or use static elimination devices. For moisture-related adhesion, maintain dry air conditions and consider using anti-static lubricants on rollers.

These questions and answers offer insights into challenges and solutions related to flexible plastic printing, covering adhesive selection, material structures, color issues, prevention of oxidation, and addressing powder adhesion in packaging.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry