Impact of Offset Printing on Post-Coating in Packaging
Ink Layer Thickness and Area of Packaging Prints: Some packaging prints have extensive graphic areas, and some involve solid printing, resulting in a thick ink layer. Thick ink layers often struggle to adhere to plastic film, leading to delamination and bubbling shortly after bonding. This is because the dense ink layer alters the surface characteristics of the paper, closing the paper fibers' capillaries and hindering the penetration and spread of the adhesive on the paper. This significantly affects the adhesion strength of the coating. Additionally, changes in ink layer thickness and area cause variations in surface tension, impacting bond strength. Therefore, strict control of ink quantity and solid density is crucial in packaging printing. In packaging offset printing, the ink layer is thinner compared to other printing methods, typically controlled within 2-3µm for favorable coating.
Ink Selection for Packaging Printing: Coated products from packaging printing should utilize quick-setting high-gloss offset printing inks. These inks consist of synthetic resins, drying vegetable oils, high-boiling point kerosene, etc. The molecular groups in these synthetic resins and cross-linking agents mutually extend and penetrate, forming cross-links that contribute to effective coating. Care must be taken not to overuse kerosene, as excessive amounts can lead to rapid ink drying, causing crystallization on the ink layer surface and negatively impacting the coating effect. Diluting agents may be required for light-colored printing, and high-quality diluting agents should be used. Specific caution is advised against using emulsifiers in white ink, as poor-quality white ink particles may not bind securely with the connecting material, hindering adhesion.
Application of Printing Powder: To accommodate high-speed printing on multicolor machines and prevent backside soiling of the paper during printing, powder spray processes are commonly employed in packaging offset printing. The sprayed powder, mostly composed of starch and natural suspending agents, may form coarse particles. Excessive powder during printing can cause these particles to float on the print surface. As a result, the adhesive does not uniformly bond with the ink layer, significantly affecting coating quality. Therefore, strict control of powder spray quantity is essential in packaging offset printing, using the minimum required to avoid soiling.
Drying Conditions of the Print Surface and Inner Layers: Poor drying of the ink layer on the print surface or inner layers of the print significantly harms coating quality, leading to issues such as bubbling and delamination. Many factors, including ink type, drying agent quantity, paper structure, and workshop temperature and humidity, influence the drying of the ink layer. Therefore, attention to ink layer drying conditions is critical during printing. Careful control of ink-water balance, monitoring ink emulsification, and maintaining the correct acidity level of fountain solution are essential. Additionally, controlling workshop temperature and humidity ensures that both the surface and inner layers of packaging prints are adequately dried, guaranteeing coating quality.





