Dropped network, ink non-adherence, insufficient print endurance

Dec 12, 2023 Leave a message

When the issues of network dropping, ink non-adherence, and insufficient print endurance arise, many customers immediately suspect CTP. Some customers even inquire about the print endurance of the plates produced during the equipment procurement research phase, asking, 'What is the print endurance of your equipment?'

This is a frustrating question, easy to explain yet seemingly complex. As a user of CTP, it is essential to understand this 'mystery.'

Let's first understand the exposure mechanism of plates. Taking a familiar example of the Huaguang plate: Huaguang UV-P type plate, suitable for UV-CTP positive plates. Positive plates are photosensitive plates where the exposed part decomposes in the development process to form the non-graphic area (hydrophilic area), while the unexposed area becomes the printing graphic area (ink area). The mechanism is similar for thermal plates. Positive plates are suitable for commercial printing. Huaguang UV-N type plate, suitable for UV-CTP negative plates, is a negative plate where the exposed part undergoes polymerization/cross-linking to form the printing graphic area, and the unexposed area is removed during development, forming the non-graphic area. Negative plates are suitable for packaging printing.

In simpler terms, for positive plates (UV or thermal), the part hit by the laser is washed away to reveal the aluminum base, corresponding to the fountain solution on the printing press. The part not touched by the laser, the coating remains on the plate, corresponding to the ink on the printing press. To make it clear, the part untouched by the laser won't hold ink or may come off. What does this have to do with CTP?

Perhaps someone is getting anxious now, thinking, 'What does it have to do with you or anyone else!'

The causes of insufficient print endurance, plate dropping, poor images, and non-adherence to ink are often multifactorial. Identifying the problem is not difficult, and many incorrect production habits and errors in the production process can lead to these issues.

(1) Plate processor: Excessive washing is the most common cause. The plate processor is not an 'adjustment point' in the production process. Some customers, seeing the bottom gray on the plate, use the concentration, temperature, and speed of the chemicals to adjust the bottom gray. To improve production efficiency, they increase the temperature and speed of washing. To save costs, they cut back on chemicals. To save money, they skip steps like water rinsing and skip applying protective gum. Improper maintenance of some plate processors, such as crystallization and excessive brush pressure, can also lead to excessive washing.

(2) Using one solution to wash multiple types of plates with different alkali resistance parameters will inevitably lead to overwashing.

(3) Using the same calibration curve and the same focus file for different plates.

(4) Press-related factors: Fountain solution with a high pH, excessive physical wear of the plate (rubber blanket, underlay, pressure, speed, paper), incorrect use of plate cleaner, excessive alcohol (involving the plate's resistance to alcohol).

(5) Plate alkali resistance can be tested through a simple washing test. Take a plate, put it directly into the plate processor, and wash it 2 to 3 times. If it turns into a white plate, you need to be careful.

(6) Tips: Try using plates from a different brand; pay attention to whether the problems always occur in a specific printing house or on a specific press.

(7) If your company has high print endurance requirements or machine time is scarce, and you value quality, it is recommended to use a good plate processor, relatively stable plates, matching chemicals, check the pH of the press's fountain solution, and bake the plates.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry